NUMBERING OF THE LOADING BAYS
Numbering for the outside and inside, with colors at choice. Support of rigid acrylic material, of formed for direct application.
of PVC for exteriors: the height of the numbering and the color and the character can be chosen. The application is foreseen onto a plain and clean surface. Not adapt to be fixed onto cement walls.
Made of acrylic 4 mm thick. Ratio between width and height = 4:3.
The support is normally white but it can be of the desired color.
The dimensions of the support, of the numbers, the color of the support and of the numbering can be chosen.
The support can be installed with 4 screws into the 4 holes.
ON BACK LIGHTED SUPPORT
The numbering on support is installed in a container, in a specific protected from the weather and back lighted with LED lightings. This system allows for a very good visibility during the day, under bright sun, and during the nights
Click here for identifying the product code and its dimensions.
REQUEST QUOTE FOR CAMPISA’S PRODUCTS
SEE OTHER PRODUCTS OF THE SECTION ACCESSORIES
Vehicle wheels guides
Hot dip galvanized steel pipes, for centering the wheels of the backing vehicles
Inside vehicle led lighting
LED flood tecnology, low consumption, for high safety in loading the vehicles
Protection bollards for sectional doors
Bollards of protection of the guides of the sectional doors. Sturdy elements, fixed to ground by expansion…
Ant-collision protection for consolles
Protections to be fixed to ground by expansion bolts, for the protection of the Consolles and obtain…