FLUCTUATING BUMPERS

Home » BUMPERS » FLUCTUATING BUMPERS
FLUCTUATING BUMPERS

FLUCTUATING BUMPERS

Made of highly resistant and qualified rubber, the floating bumpers for loading bays are designed to adapt to the vertical movements of the vehicle during loading and unloading operations.

Designed to follow the vertical movements of the vehicle and made with top resistance rubber, Float bumpers are the ultimate solution for the protection of any loading bay and dock leveller.

High-strength rubber, screw fixing system, large surface area: these features allow the Mega bumpers to absorb any impact and to last for a long time.

The thickness of 100mm makes these rubber bumpers for loading bays ideal to better withstand impacts with the rear of vehicles in operation.

Only the overlapping of the dock by higher vehicles is the danger. In this case, fit the raising options of 150 mm.

The FLOAT bumpers ARE MADE OF SPECIAL QUALIFIES RUBBER THAT RESIST TO COMPRESSIONAND FRICTIONS, they absorb the impact of the docking vehicle as to preserve the dock and the dock leveller, and fluctuate UP-DOWN together with the vehicle in case of inward slope of the court. In this case they sometimes need the optional steel cover.
In case the vehicles overlap the dock level, every type of bumpers is destroyed when the vehicle is loaded and it lays onto the dock and it departs. In this case it is indispensable to install raising devices and sometimes the optional steel cover.

DIMENSIONS

Width 150 mm
Height 550 mm
Depth 120 mm (RUBBER)
Positive excursion 150 mm
Negative excursion 90 mm
Option to be installed in raised position, 150 mm UP above the dock level

ELASTIC ELEMENT

Elastomero with base of NR+SBR with top resistance to the compression and to the abrasion, vulcanized onto a galvanized steel plate.

SUPPORT

With special steel elements, welded and lacquered orange RAL 2000

FUNCTIONING

Sliding in vertical into steel dedicated profiles, the neutral position is obtained by two springs that maintain the bumper in rest position at dock level

INSTALLATION

Floating Bumpers are installed by bolting them into manifold provided into the casting of the Campisa prefabrications. This allows a quick and solid installation and easy maintenance.

The installation on traditional systems of dock are made by expansion bolts or fixation to existing elements.

The MEGA bumpers can be completed with the following options:
Front 15 mm thick steel protection plate, galvanized, raising system of 150 mm above the dock level

Download the catalogue to identify the product code and its dimensional characteristics.

DOWNLOAD LOADING BAYS CATALOGUE

DOWNLOAD

REQUEST QUOTE FOR CAMPISA’S PRODUCTS

CONTACT US

SEE OTHER PRODUCTS OF THE SECTION BUMPERS

Standard Bumpers

Rubber bumpers with three fixing points, basic supply for a keen use of the loading bay

Super Bumpers

High resistance rubber bumper, installation at dock level or raised (see options).

Mega Bumpers

High resistance and wide surface bumpers. Installation at dock level or raised (see options)