MEGA BUMPERS
Thanks to their larger surface compared to other models of bumpers, Mega Bumpers provide optimal protection for loading bays and dock levellers. They can be installed either at dock level or raised.
High-strength rubber, screw fixing system, large surface area: these features allow the Mega bumpers to absorb any impact and to last for a long time.
The thickness of 250 mm makes these rubber bumpers for loading bays ideal to better withstand impacts with the rear of vehicles in operation.
DIMENSIONS
Width 2250 mm
Height 450 mm
Depth 100 mm (RUBBER)
ELASTIC ELEMENT
Elastomero with base of industrial rubber with good characteristics of resistance to the abrasion, to the aging and to the atmosphere, 55 shore.
SUPPORT
Included into the prefabrications or supplied for direct application on the front of the wall.
INSTALLATION
The Super bumpers are installed with bolts into the threatened manifolds foreseen into the pouring of the Campisa prefabrications, on the Campisa steel docks, on the Campisa Dock Houses
Thanks to the bolt-on fixing system, the maintenance of Campisa loading bays is made even easier and faster.
Their installation on standard systems require an optional hanging steel sheet that is fixed by expansion bolts
The MEGA bumpers can be completed with the following options:
Front 15 mm thick steel protection plate, galvanized, raising system of 150 mm above the dock level
Mega Bumpers have a larger surface area than Super Bumpers, allowing them to absorb even more violent impacts, for example with very heavy trucks and vehicles.
Mega rubber bumpers for loading bays are optimal for a maximum outward slope of 2%; otherwise, with an inward slope, friction may damage the bumper.
In this case, a stronger bumper should be installed, even with a steel cover if conditions require it.
Download the catalogue to identify the product code and its dimensional characteristics.
