PREFABRICATED PITS AND LOAGING DOCKS

Home » DOCK LEVELLERS » PREFABRICATED PITS AND LOAGING DOCKS
PREFABRICATED PITS AND LOAGING DOCKS

PREFABRICATED PITS AND LOADING DOCKS

The prefabricated pits (formwork to lose) substitute the pit-rim-frame and allow a simple and quick construction that already includes the dead hinging. The leveller is mounted with its pins, without any welding. Suitable for simple pit and for pit with the bottom reservation for tail-lifts.

Quick construction of the simple pit by the use of the prefabricated pit” rif. dis. IR000-651:

  • perimeter wall A) that closed with a recoverable formwork R)
  • compacted inert filling B) until minus 20 cm from finished pavement
  • recover of the formwork R) and room C) excavation into the compacted inert, with construction of an armoutred slab
  • installation of a prefabricated pit D) with squaring jig, levelling to the finished pavement, nailing to the slab, corrugated trounking in position, pouring around
  • pouring E) until minus 15 cm abt., laying of the meshes F)
  • final pavement pouring G)

Quick construction of a pit with bottom reservation for the tail-lift by te use of a prefabricated dock rif. dis. IR000-…:

  • building of a slab at zero level
  • perimeter wall construction A)
  • three walls (perimeter of the tail-lift reservation) construction
  • installation of the prefabricated dock onto the three perimeter walls
  • laying of two hi-bonds to cover the side spaces
  • pouring until minus 20 cm
  • mesh laying and levelling to the finished pavement

PLATFORM PROTECTED BY A PVC FILM

All CampisaCast are delivered with a PVC film sticked onto the top platform, until the side frames, and into the between, polystyrene sheets are introduced in order to keep the distance between platform and pit-sides. The top PVC sheet preserves the dock leveller from the aggressive components of the wet trades. Once the wet trades are finished, the PVC sheet is detached and deserted. The dock leveller remains perfect

ANCHORS FOR THE BUMPERS

The front assembly that closes the leveller CampisaCast has a special system for fixing the bumpers, each bolt of the bumper will be strongly blocked because a threatened bolt results fixed and anchored inside the pouring. The standard product foresees the Standard bumpers, dimensions 60x350x 120 mm deep from dock rim, fixing by 3 bolts M12.

FINISHING

The whole structure in contact with the cement is of sendzimir coated sheet and grants a long lasting also if in bed weather conditions.

PRE-WIRING

The hydraulic and the electric systems (when with power pack into the pit) are realized and tested at the workshop. At the installation moment the installation times are very reduced.

ANCHORINGS

The CampisaCast has special anchors on the backside studied, by experience, for long lasting also with all the effords transmitted to the head hangings that connect the platform to the dock. A patented “ant-nail” system that grants against the hooking of the perimeter side sheets complete the peculiarities of this dock leveller.

HANDLING

The CampisaCast levellers are supplied with a lifting tool adapt for a crane and for a fork lift.

Option: all bumpers can be supplied as option: SUPER, MEGA, FLUCTUATING
NOTE: the prefabricated pits and docks are supplied only for the one lift cylinder levellers.
Click here for identifying the product code and its dimensional characteristics

DOWNLOAD LOADING BAYS CATALOGUE

DOWNLOAD

REQUEST QUOTE FOR CAMPISA’S PRODUCTS

CONTACT US

SEE OTHER PRODUCTS OF THE SECTION DOCK LEVELLERS

Swivelling lip dock: installation with accessories

Electrohydraulic dock leveller with swivelling lip, strong and lasting, it allows to load the vehicles…

Suspended dock levellers with swivelling and telescopic tip

Dock levellers in one piece, inclusive of the powerpack, compact frame. 550 mm high pack, complete with…

Swivelling and telescopic lip castle dock levellers

Dock levellers in one piece, inclusive of the powerpack, compact frame. 550 mm high pack, complete with…

Telescopic lip dock leveller

Electrohydraulic dock leveller with telescopic lip, strong and lasting, it allows to load the vehicles…

CampisaCast dock levellers

The CampisaCast dock levellers represents the simplest solution for building a loading bay: there is…

Traditional pits fitting systems

The dock leveller is installed into pits made on drawing, that require protection for the rims. The frame…

Minilinker Dock levellers

Manual levellers, counterbalanced with a gas-spring or hydraulically powered, that allow to solve economically…