FIDELITY® CONSOLLE

Home » FIDELITY® » FIDELITY® CONSOLLE
FIDELITY® CONSOLLE

CONSOLLE FOR SECTIONAL DOORS AND CENTRALISED CONSOLLE

European Patent n. 1483472 and patent pending. 

The Console is an electrohydraulic unit that provides the power to the drive. It can serve only one machine (e.g. a door) or two machines (e.g. two doors or a door and a dock leveller). Installed at about 1.5 m height, elegantly combines motor, tank and controls.
Perfectly safe, factory tested, includes all the required safety systems: maximum pressure valve, oil tank, manual pump where necessary.

If centralised two functions, it allows the operation of one at a time, for safety. The wall installation allows a clean and easy inspection without risks.

The Console is mounted on the wall, at about 1500 mm finished floor level. It contains in an elegant cover the electrohydraulic motor 400V three phase 50 – 60 Hz, 0,75 kW, the high temperature resistant plastic tank and has front commands with door-switch.

The tank and door controls are housed within a steel enclosure. The hydraulic system contains 4.5 Lts of oil which is sufficient to operate two units i.e. 2 sectional doors or a sectional door and leveller.

The system includes a manual override to open the door in the case of emergency.

Where 2 sectional doors are operated by one Fidelity® drive system the operation of the door is dead man. This provides a safe system as the operator is in full sight of the doors.

The Console for one automatic door requires safety systems (not supplied). The automatic Console is provided with an emergency stopswitch.

The centralised Consoles serve the two connected hydraulic machines of the loading bay: the sectional door and the dock leveller, with the connected hydraulic hosings protected by a steel cover. The leveller is interlocked to door fully open opposition, preventing collision with traffic over the leveller.

The centralised Console can be used with a sectional door and either a swing or telescopic leveller. Operation of the leveller is standard Dead man controls.

The Console for one door and one telescopic lip dock leveller can have the “auto-retract” automatic return to rest position.

Click on the image to enlarge.

The Campisa electrohydraulic Consolle is an electrohydraulic powerpack that supplies oil in pressure and that contains the distributing system of it.
The buttons on the commands are:

  • Lifting and lowering of the sectional door that can be “dead man”, semiautomatic or automatic
  • For the loading bays it is suggested to install automatic-up and “dead man” down doors, as to be sure of having always the door totally open when loading.

CONSOLE “TOTEM”

Where there is limited space on the wall a free standing galvanised totem unit can be supplied which is bolted directly to the floor providing a simple solution.

CONSOLE MOUNTING PLATE

Provides a simple solution when mounting the Fidelity® system to composite insulated walls.

European Patent n. 1483472 and patent pending

DOWNLOAD FIDELITY® CATALOGUE

DOWNLOAD

REQUEST QUOTE FOR CAMPISA’S PRODUCTS

CONTACT US

SEE OTHER PRODUCTS OF THE SECTION FIDELITY®

fidelity powering

FIDELITY® Powering

The genius of a hydraulic motor with total security and minimal maintenance.

fidelity compact

FIDELITY®  Compact

Control unit, hydraulic motor and cylinder integrated in the box.

hydraulic consolle

Electrohydraulic unit for door and dock leveller

Electrohydraulic unit for lifting the FIDELITY system sectional doors and for operating a dock leveller.